Curated Package management

• 1: Overview of curated packages
• 2: Prerequisites
• 3: Packages configuration
• 4: Managing the package controller
• 5: Packages regional ECR migration
• 6: Managing package bundles
• 7: Configuration best practices
• 8: Packages
• 9: Changelog
• 10: Curated packages troubleshooting
• 11: ADOT Configuration
• 11.1: ADOT with AMP and AMG
• 11.2: AWS Distro for OpenTelemetry (ADOT)
• 11.3: v0.21.1
• 11.4: v0.23.0
• 11.5: v0.25.0
• 11.6: v0.39.0
• 11.7: v0.41.1
• 12: Cert-Manager Configuration
• 12.1: Cert-Manager
• 12.2: v1.9.1
• 12.3: v1.14.5
• 12.4: v1.15.3
• 13: Cluster Autoscaler Configuration
• 13.1: Cluster Autoscaler
• 13.2: v9.21.0
• 13.3: v9.37.0
• 13.4: v9.43.0
• 14: Credential Provider Package Configuration
• 14.1: Credential Provider Package with IAM Roles Anywhere
• 14.2: Credential Provider Package
• 14.3: v0.1.0
• 14.4: v0.4.4
• 15: Emissary Configuration
• 15.1: Emissary Ingress
• 15.2: v3.0.0
• 15.3: v3.3.0
• 15.4: v3.9.1
• 16: Harbor Configuration
• 16.1: Harbor
• 16.2: Harbor use cases
• 16.3: v2.5.0
• 16.4: v2.5.1
• 16.5: v2.7.1
• 16.6: v2.10.2
• 16.7: v2.11.1
• 17: MetalLB Configuration
• 17.1: MetalLB
• 17.2: v0.12.1
• 17.3: v0.13.5
• 17.4: v0.13.7
• 17.5: v0.14.5
• 17.6: v0.14.8
• 18: Prometheus Configuration
• 18.1: Prometheus with Grafana
• 18.2: Prometheus
• 18.3: v2.39.1
• 18.4: v2.41.1
• 18.5: v2.52.0
• 18.6: v2.54.1
• 19: Metrics Server Configuration
• 19.1: Metrics Server
• 19.2: v3.8.2
• 19.3: v3.12.1
• 19.4: v3.12.2
• 20:

1 - Overview of curated packages

Components of EKS Anywhere curated packages consist of a controller, a CLI, and artifacts.

Package controller

The package controller is responsible for installing, upgrading, configuring, and removing packages from the cluster. It performs these actions by watching the package and packagebundle custom resources. Moreover, it uses the packagebundle to determine which packages to run and sets appropriate configuration values.

Packages custom resources map to helm charts that the package controller uses to install packages workloads (such as cluster-autoscaler or metrics-server) on your clusters. The packagebundle object is the mapping between the package name and the specific helm chart and images that will be installed.

The package controller only runs on the management cluster, including single-node clusters, to perform the above outlined responsibilities. However, packages may be installed on both management and workload clusters. For more information, see the guide on installing packages on workload clusters.

Package release information is stored in a package bundle manifest. The package controller will continually monitor and download new package bundles. When a new package bundle is downloaded, it will show up as “available” in the PackageBundleController resource’s status.detail field. A package bundle upgrade always requires manual intervention as outlined in the package bundles docs.

Any changes to a package custom resource will trigger an install, upgrade, configuration or removal of that package. The package controller will use ECR or private registry to get all resources including bundle, helm charts, and container images.

You may install the package controller after cluster creation to take advantage of curated package features.

Packages CLI

The Curated Packages CLI provides the user experience required to manage curated packages. Through the CLI, a user is able to discover, create, delete, and upgrade curated packages to a cluster. These functionalities can be achieved during and after an EKS Anywhere cluster is created.

The CLI provides both imperative and declarative mechanisms to manage curated packages. These packages will be included as part of a packagebundle that will be provided by the EKS Anywhere team. Whenever a user requests a package creation through the CLI (eksctl anywhere create package), a custom resource is created on the cluster indicating the existence of a new package that needs to be installed. When a user executes a delete operation (eksctl anywhere delete package), the custom resource will be removed from the cluster indicating the need for uninstalling a package. An upgrade through the CLI (eksctl anywhere upgrade packages) upgrades all packages to the latest release.

Please check out Install EKS Anywhere to install the eksctl anywhere CLI on your machine.

The create cluster page for each EKS Anywhere provider describes how to configure and install curated packages at cluster creation time.

Curated packages artifacts

There are three types of build artifacts for packages: the container images, the helm charts and the package bundle manifests. The container images, helm charts and bundle manifests for all of the packages will be built and stored in EKS Anywhere ECR repository. Each package may have multiple versions specified in the packages bundle. The bundle will reference the helm chart tag in the ECR repository. The helm chart will reference the container images for the package.

Installing packages on workload clusters

The package controller only runs on the management cluster. It determines which cluster to install your package on based on the namespace specified in the Package resource.

See an example package below:

apiVersion: packages.eks.amazonaws.com/v1alpha1
kind: Package
metadata:
  name: my-hello-eks-anywhere
  namespace: eksa-packages-wk0
spec:
  config: |
        title: "My Hello"
  packageName: hello-eks-anywhere
  targetNamespace: default

By specifying metadata.namespace: eksa-packages-wk0, the package controller will install the resource on workload cluster wk0. The pattern for these namespaces is always eksa-packages-<cluster-name>.

By specifying spec.targetNamespace: default, the package controller will install the hello-eks-anywhere package helm chart in the default namespace in cluster wk0.

2 - Prerequisites

Prerequisites

Before installing any curated packages for EKS Anywhere, do the following:

• Check that the cluster Kubernetes version is v1.21 or above. For example, you could run kubectl get cluster -o yaml <cluster-name> | grep -i kubernetesVersion

• Check that the version of eksctl anywhere is v0.11.0 or above with the eksctl anywhere version command.

• It is recommended that the package controller is only installed on the management cluster.

• Check the existence of package controller:

  kubectl get pods -n eksa-packages | grep "eks-anywhere-packages"
  

  If the returned result is empty, you need to install the package controller.

• Install the package controller if it is not installed: Install the package controller

  Note This command is temporarily provided to ease integration with curated packages. This command will be deprecated in the future

  eksctl anywhere install packagecontroller -f $CLUSTER_NAME.yaml
  

To request a free trial, talk to your Amazon representative or connect with one here .

Identify AWS account ID for ECR packages registry

The AWS account ID for ECR packages registry depends on the EKS Anywhere Enterprise Subscription.

• For EKS Anywhere Enterprise Subscriptions purchased through the AWS console or APIs the AWS account ID for ECR packages registry varies depending on the region the Enterprise Subscription was purchased. Reference the table in the expanded output below for a mapping of AWS Regions to ECR package registries.

• For EKS Anywhere Curated Packages trials or EKS Anywhere Enterprise Subscriptions purchased before October 2023 the AWS account ID for ECR packages registry is 783794618700. This supports pulling images from the following regions.

After identifying the AWS account ID; export it for further reference. Example

export ECR_PACKAGES_ACCOUNT=346438352937

Setup authentication to use curated packages

When you have been notified that your account has been given access to curated packages, create an IAM user in your account with a policy that only allows ECR read access to the Curated Packages repository; similar to this:

{
    "Version": "2012-10-17",
    "Statement": [
        {
            "Sid": "ECRRead",
            "Effect": "Allow",
            "Action": [
                "ecr:DescribeImageScanFindings",
                "ecr:GetDownloadUrlForLayer",
                "ecr:DescribeRegistry",
                "ecr:DescribePullThroughCacheRules",
                "ecr:DescribeImageReplicationStatus",
                "ecr:ListTagsForResource",
                "ecr:ListImages",
                "ecr:BatchGetImage",
                "ecr:DescribeImages",
                "ecr:DescribeRepositories",
                "ecr:BatchCheckLayerAvailability"
            ],
            "Resource": "arn:aws:ecr:*:<ECR_PACKAGES_ACCOUNT>:repository/*"
        },
        {
            "Sid": "ECRLogin",
            "Effect": "Allow",
            "Action": [
                "ecr:GetAuthorizationToken"
            ],
            "Resource": "*"
        }
    ]
}

Note Use the corresponding EKSA_AWS_REGION prior to cluster creation to choose which region to pull form.

Create credentials for this user and set and export the following environment variables:

export EKSA_AWS_ACCESS_KEY_ID="your*access*id"
export EKSA_AWS_SECRET_ACCESS_KEY="your*secret*key"
export EKSA_AWS_REGION="aws*region"

Make sure you are authenticated with the AWS CLI

export AWS_ACCESS_KEY_ID="your*access*id"
export AWS_SECRET_ACCESS_KEY="your*secret*key"
aws sts get-caller-identity

Login to docker

aws ecr get-login-password --region us-west-2 | docker login --username AWS --password-stdin $ECR_PACKAGES_ACCOUNT.dkr.ecr.$EKSA_AWS_REGION.amazonaws.com

Verify you can pull an image

docker pull $ECR_PACKAGES_ACCOUNT.dkr.ecr.$EKSA_AWS_REGION.amazonaws.com/emissary-ingress/emissary:v3.9.1-828e7d186ded23e54f6bd95a5ce1319150f7e325

If the image downloads successfully, it worked!

Prepare for using curated packages for airgapped environments

If you are running in an airgapped environment and you set up a local registry mirror, you can copy curated packages from Amazon ECR to your local registry mirror with the following command.

The $BUNDLE_RELEASE_YAML_PATH should be set to the eks-anywhere-downloads/bundle-release.yaml location where you unpacked the tarball from theeksctl anywhere download artifacts command. The $REGISTRY_MIRROR_CERT_PATH and $REGISTRY_MIRROR_URL values must be the same as the registryMirrorConfiguration in your EKS Anywhere cluster specification.

eksctl anywhere copy packages \
  --bundle ${BUNDLE_RELEASE_YAML_PATH} \
  --dst-cert ${REGISTRY_MIRROR_CERT_PATH} \
  ${REGISTRY_MIRROR_URL}

Once the curated packages images are in your local registry mirror, you must configure the curated packages controller to use your local registry mirror post-cluster creation. Configure the defaultImageRegistry and defaultRegistry settings for the PackageBundleController to point to your local registry mirror by applying a similar yaml definition as the one below to your standalone or management cluster. Existing PackageBundleController can be changed, and you do not need to deploy a new PackageBundleController. See the Packages configuration documentation for more information.

apiVersion: anywhere.eks.amazonaws.com/v1alpha1
kind: PackageBundleController
metadata:
  name: eksa-packages-bundle-controller
  namespace: eksa-packages
spec:
  defaultImageRegistry: ${REGISTRY_MIRROR_URL}/curated-packages
  defaultRegistry: ${REGISTRY_MIRROR_URL}/eks-anywhere

Discover curated packages

You can get a list of the available packages from the command line:

export CLUSTER_NAME=<your-cluster-name>
export KUBECONFIG=${PWD}/${CLUSTER_NAME}/${CLUSTER_NAME}-eks-a-cluster.kubeconfig
eksctl anywhere list packages --kube-version 1.31

Example command output:

Package                 Version(s)
-------                 ----------
hello-eks-anywhere      0.1.2-a6847010915747a9fc8a412b233a2b1ee608ae76
adot                    0.25.0-c26690f90d38811dbb0e3dad5aea77d1efa52c7b
cert-manager            1.9.1-dc0c845b5f71bea6869efccd3ca3f2dd11b5c95f
cluster-autoscaler      9.21.0-1.23-5516c0368ff74d14c328d61fe374da9787ecf437
harbor                  2.5.1-ee7e5a6898b6c35668a1c5789aa0d654fad6c913
metallb                 0.13.7-758df43f8c5a3c2ac693365d06e7b0feba87efd5
metallb-crds            0.13.7-758df43f8c5a3c2ac693365d06e7b0feba87efd5
metrics-server          0.6.1-eks-1-23-6-c94ed410f56421659f554f13b4af7a877da72bc1
emissary                3.3.0-cbf71de34d8bb5a72083f497d599da63e8b3837b
emissary-crds           3.3.0-cbf71de34d8bb5a72083f497d599da63e8b3837b
prometheus              2.41.0-b53c8be243a6cc3ac2553de24ab9f726d9b851ca

Generate curated packages configuration

The example shows how to install the harbor package from the curated package list .

export CLUSTER_NAME=<your-cluster-name>
eksctl anywhere generate package harbor --cluster ${CLUSTER_NAME} --kube-version 1.31 > harbor-spec.yaml

3 - Packages configuration

This is a generic template with detailed descriptions below for reference. To generate your own package configuration, follow instructions from Package Management section and modify it using descriptions below.

apiVersion: anywhere.eks.amazonaws.com/v1alpha1
kind: PackageBundleController
metadata:
  name: eksa-packages-bundle-controller
  namespace: eksa-packages
spec:
  activeBundle: v1-21-83
  defaultImageRegistry: 783794618700.dkr.ecr.us-west-2.amazonaws.com
  defaultRegistry: public.ecr.aws/eks-anywhere
  privateRegistry: ""
  upgradeCheckInterval: 24h0m0s

---
apiVersion: packages.eks.amazonaws.com/v1alpha1
kind: PackageBundle
metadata:
  name: package-bundle
  namespace: eksa-packages
spec:
  packages:
    - name: hello-eks-anywhere
      source:
        repository: hello-eks-anywhere
        versions:
          - digest: sha256:c31242a2f94a58017409df163debc01430de65ded6bdfc5496c29d6a6cbc0d94
            images:
              - digest: sha256:26e3f2f9aa546fee833218ece3fe7561971fd905cef40f685fd1b5b09c6fb71d
                repository: hello-eks-anywhere
            name: 0.1.1-083e68edbbc62ca0228a5669e89e4d3da99ff73b
            schema: H4sIAJc5EW...

---
apiVersion: packages.eks.amazonaws.com/v1alpha1
kind: Package
metadata:
  name: my-hello-eks-anywhere
  namespace: eksa-packages
spec:
  config: |
        title: "My Hello"
  packageName: hello-eks-anywhere
  targetNamespace: eksa-packages

API Reference

Packages:

• packages.eks.amazonaws.com/v1alpha1

packages.eks.amazonaws.com/v1alpha1

Resource Types:

• PackageBundleController

• PackageBundle

• Package

PackageBundleController

^{↩ Parent}

PackageBundleController is the Schema for the packagebundlecontroller API.

PackageBundleController.spec

^{↩ Parent}

PackageBundleControllerSpec defines the desired state of PackageBundleController.

PackageBundleController.status

^{↩ Parent}

PackageBundleControllerStatus defines the observed state of PackageBundleController.

PackageBundleController.status.spec

^{↩ Parent}

Spec previous settings

PackageBundle

^{↩ Parent}

PackageBundle is the Schema for the packagebundle API.

PackageBundle.spec

^{↩ Parent}

PackageBundleSpec defines the desired state of PackageBundle.

PackageBundle.spec.packages[index]

^{↩ Parent}

BundlePackage specifies a package within a bundle.

PackageBundle.spec.packages[index].source

^{↩ Parent}

Source location for the package (probably a helm chart).

PackageBundle.spec.packages[index].source.versions[index]

^{↩ Parent}

SourceVersion describes a version of a package within a repository.

PackageBundle.spec.packages[index].source.versions[index].images[index]

^{↩ Parent}

VersionImages is an image used by a version of a package.

PackageBundle.status

^{↩ Parent}

PackageBundleStatus defines the observed state of PackageBundle.

PackageBundle.status.spec

^{↩ Parent}

PackageBundleSpec defines the desired state of PackageBundle.

PackageBundle.status.spec.packages[index]

^{↩ Parent}

BundlePackage specifies a package within a bundle.

PackageBundle.status.spec.packages[index].source

^{↩ Parent}

Source location for the package (probably a helm chart).

PackageBundle.status.spec.packages[index].source.versions[index]

^{↩ Parent}

SourceVersion describes a version of a package within a repository.

PackageBundle.status.spec.packages[index].source.versions[index].images[index]

^{↩ Parent}

VersionImages is an image used by a version of a package.

Package

^{↩ Parent}

Package is the Schema for the package API.

Package.spec

^{↩ Parent}

PackageSpec defines the desired state of an package.

Package.status

^{↩ Parent}

PackageStatus defines the observed state of Package.

Package.status.source

^{↩ Parent}

Source associated with the installation.

Package.status.spec

^{↩ Parent}

Spec previous settings

Package.status.upgradesAvailable[index]

^{↩ Parent}

PackageAvailableUpgrade details the package’s available upgrade versions.

4 - Managing the package controller

Installing the package controller

The package controller is typically installed during cluster creation, but may be disabled intentionally in your cluster.yaml by setting spec.packages.disable to true.

If you created a cluster without the package controller or if the package controller was not properly configured, you may need to manually install it.

1. Enable the package controller in your cluster.yaml, if it was previously disabled:

   apiVersion: anywhere.eks.amazonaws.com/v1alpha1
   kind: Cluster
   metadata:
     name: mgmt
   spec:
     packages:
       disable: false
   

2. Make sure you are authenticated with the AWS CLI. Use the credentials you set up for packages. These credentials should have limited capabilities :

   export AWS_ACCESS_KEY_ID="your*access*id"
   export AWS_SECRET_ACCESS_KEY="your*secret*key"
   export EKSA_AWS_ACCESS_KEY_ID="your*access*id"
   export EKSA_AWS_SECRET_ACCESS_KEY="your*secret*key"
   

3. Verify your credentials are working:

   aws sts get-caller-identity
   

4. Authenticate docker to the private AWS ECR registry with your AWS credentials. Reference prerequisites to identity the AWS account that houses the EKS Anywhere packages artifacts. Authentication is required to pull images from it.

   aws ecr get-login-password | docker login --username AWS --password-stdin $ECR_PACKAGES_ACCOUNT.dkr.ecr.$EKSA_AWS_REGION.amazonaws.com
   

5. Verify you can pull an image from the packages registry:

   docker pull $ECR_PACKAGES_ACCOUNT.dkr.ecr.$EKSA_AWS_REGION.amazonaws.com/emissary-ingress/emissary:v3.9.1-828e7d186ded23e54f6bd95a5ce1319150f7e325
   

   If the image downloads successfully, it worked!

6. Now, install the package controller using the EKS Anywhere Packages CLI:

   eksctl anywhere install packagecontroller -f cluster.yaml
   

   The package controller should now be installed!

7. Use kubectl to check the eks-anywhere-packages pod is running in your management cluster:

   kubectl get pods -n eksa-packages 
   NAME                                     READY   STATUS    RESTARTS   AGE
   eks-anywhere-packages-55bc54467c-jfhgp   1/1     Running   0          21s
   

Updating the package credentials

You may need to create or update your credentials which you can do with a command like this. Set the environment variables to the proper values before running the command.

kubectl delete secret -n eksa-packages aws-secret
kubectl create secret -n eksa-packages generic aws-secret \
  --from-literal=AWS_ACCESS_KEY_ID=${EKSA_AWS_ACCESS_KEY_ID} \
  --from-literal=AWS_SECRET_ACCESS_KEY=${EKSA_AWS_SECRET_ACCESS_KEY}  \
  --from-literal=REGION=${EKSA_AWS_REGION}

Upgrade the packages controller

EKS Anywhere v0.15.0 (packages controller v0.3.9+) and onwards includes support for the eks-anywhere-packages controller as a self-managed package feature. The package controller now upgrades automatically according to the version specified within the management cluster’s selected package bundle.

For any version prior to v0.3.X, manual steps must be executed to upgrade.

To manually upgrade the package controller, do the following:

1. Ensure the namespace will be kept

kubectl annotate namespaces eksa-packages helm.sh/resource-policy=keep

2. Uninstall the eks-anywhere-packages helm release

helm uninstall -n eksa-packages eks-anywhere-packages

3. Remove the secret called aws-secret (we will need credentials when installing the new version)

kubectl delete secret -n eksa-packages aws-secret

4. Install the new version using the latest eksctl-anywhere binary on your management cluster

eksctl anywhere install packagecontroller -f eksa-mgmt-cluster.yaml

5 - Packages regional ECR migration

When you purchase an EKS Anywhere Enterprise Subscription through the Amazon EKS console or APIs, the AWS account that purchased the subscription is automatically granted access to EKS Anywhere Curated Packages in the AWS Region where the subscription is created. If you received trial access to EKS Anywhere Curated Packages or if you have an EKS Anywhere Enterprise Subscription that was created before October 2023, then you need to migrate your EKS Anywhere Curated Packages configuration to use the latest ECR regional repositories. This process would cause all the Curated Packages installed on the cluster to rollout and be deployed from the latest ECR regional repositories.

Steps for Migration

1. Ensure you have an active EKS Anywhere Enterprise Subscription. For more information, refer Purchase subscriptions.

2. If the AWS account that created the EKS Anywhere Enterprise Subscription through the Amazon EKS console or APIs and the AWS IAM user credentials for curated packages on your existing cluster are different, you need to update the aws-secret object on the cluster with new credentials. Refer Updating the package credentials .

3. Edit the ecr-credential-provider-package package on the cluster and update matchImages with the correct ECR package registry for the AWS Region where you created your subscription. Example, 346438352937.dkr.ecr.us-west-2.amazonaws.com for us-west-2. Reference the table in the expanded output at the top of this page for a mapping of AWS Regions to ECR package registries.

   kubectl edit package ecr-credential-provider-package  -n eksa-packages-<cluster name>
   

   This causes ecr-credential-provider-package pods to rollout and the kubelet is configured to use AWS credentials for pulling images from the new regional ECR packages registry.

4. Edit the PackageBundleController object on the cluster and set the defaultImageRegistry and defaultRegistry to point to the ECR package registry for the AWS Region where you created your subscription.

   kubectl edit packagebundlecontroller <cluster name> -n eksa-packages
   

5. Restart the eks-anywhere-packages controller deployment.

   kubectl rollout restart deployment eks-anywhere-packages -n eksa-packages
   

   This step causes the package controller to pull down a new package bundle onto the cluster and marks the PackageBundleController as upgrade available. Example

   NAMESPACE       NAME              ACTIVEBUNDLE   STATE               DETAIL
   eksa-packages   my-cluster-name   v1-28-160      upgrade available   v1-28-274 available
   

6. Edit the PackageBundleController object on the cluster and set the activeBundle field to the new bundle number that is available.

   kubectl edit packagebundlecontroller <cluster name> -n eksa-packages
   

   This step causes all the packages on the cluster to be reinstalled and pods rolled out from the new registry.

7. Edit the ecr-credential-provider-package package again and now set the sourceRegistry to point to the ECR package registry for the AWS Region where you created your subscription.

   kubectl edit package ecr-credential-provider-package  -n eksa-packages-<cluster name>
   

   This causes ecr-credential-provider-package to be reinstalled from the new registry.

6 - Managing package bundles

Getting new package bundles

Package bundle resources are created and managed in the management cluster, so first set up the KUBECONFIG environment variable for the management cluster.

export KUBECONFIG=mgmt/mgmt-eks-a-cluster.kubeconfig

The EKS Anywhere package controller periodically checks upstream for the latest package bundle and applies it to your management cluster, except for when in an airgapped environment . In that case, you would have to get the package bundle manually from outside of the airgapped environment and apply it to your management cluster.

To view the available packagebundles in your cluster, run the following:

kubectl get packagebundles -n eksa-packages
NAMESPACE       NAME        STATE
eksa-packages   v1-27-125   available

To get a package bundle manually, you can use oras to pull the package bundle (bundle.yaml) from the public.ecr.aws/eks-anywhere repository. (See the ORAS CLI official documentation for more details)

oras pull public.ecr.aws/eks-anywhere/eks-anywhere-packages-bundles:v1-27-latest
Downloading 1ba8253d19f9 bundle.yaml
Downloaded  1ba8253d19f9 bundle.yaml
Pulled [registry] public.ecr.aws/eks-anywhere/eks-anywhere-packages-bundles:v1-27-latest

Use kubectl to apply the new package bundle to your cluster to make it available for use.

kubectl apply -f bundle.yaml

The package bundle should now be available for use in the management cluster.

kubectl get packagebundles -n eksa-packages
NAMESPACE       NAME        STATE
eksa-packages   v1-27-125   available
eksa-packages   v1-27-126   available

Activating a package bundle

There are multiple packagebundlecontrollers resources in the management cluster which allows for each cluster to activate different package bundle versions. The active package bundle determines the versions of the packages that are installed on that cluster.

To view which package bundle is active for each cluster, use the kubectl command to list the packagebundlecontrollers objects in the management cluster.

kubectl get packagebundlecontrollers -A
NAMESPACE       NAME   ACTIVEBUNDLE   STATE    DETAIL
eksa-packages   mgmt   v1-27-125     active   
eksa-packages   w01    v1-27-125     active 

To upgrade the active package bundle for the target cluster, edit the packagebundlecontroller object on the cluster and set the activeBundle field to the new bundle number that is available.

kubectl edit packagebundlecontroller <cluster name> -n eksa-packages

7 - Configuration best practices

Best Practice

Any supported EKS Anywhere curated package should be modified through package yaml files (with kind: Package) and applied through the command kubectl apply -f packageFileName. Modifying objects outside of package yaml files may lead to unpredictable behaviors.

For automatic namespace (targetNamespace) creation, see createNamespace field: PackagebundleController.spec

8 - Packages

Curated package list

9 - Changelog

Package Bundle Release (10-18-2024)

Changed

• adot 0.40.1 to 0.41.1
• cert-manager 1.14.7 to 1.15.3

  • Startupapicheck image change #3790

    As of this release the cert-manager ctl is no longer part of the main repo, it has been broken out into its own project. As such the startupapicheck job uses a new OCI image called startupapicheck. If you run in an environment in which images cannot be pulled, be sure to include the new image.

• cluster-autoscaler 9.37.0 to 9.43.0
• harbor 2.11.0 to 2.11.1
• metrics-server 0.7.1 to 0.7.2
• prometheus 2.54.0 to 2.54.1

10 - Curated packages troubleshooting

General debugging

The major component of Curated Packages is the package controller. If the container is not running or not running correctly, packages will not be installed. Generally it should be debugged like any other Kubernetes application. The first step is to check that the pod is running.

kubectl get pods -n eksa-packages

You should see at least two pods with running and one or more refresher completed.

NAME                                     READY   STATUS      RESTARTS   AGE
eks-anywhere-packages-69d7bb9dd9-9d47l   1/1     Running     0          14s
eksa-auth-refresher-w82nm                0/1     Completed   0          10s

The describe command might help to get more detail on why there is a problem:

kubectl describe pods -n eksa-packages

Logs of the controller can be seen in a normal Kubernetes fashion:

kubectl logs deploy/eks-anywhere-packages -n eksa-packages controller

To get the general state of the package controller, run the following command:

kubectl get packages,packagebundles,packagebundlecontrollers -A

You should see an active packagebundlecontroller and an available bundle. The packagebundlecontroller should indicate the active bundle. It may take a few minutes to download and activate the latest bundle. The state of the package in this example is installing and there is an error downloading the chart.

NAMESPACE              NAME                                          PACKAGE              AGE   STATE       CURRENTVERSION                                   TARGETVERSION                                             DETAIL
eksa-packages-sammy    package.packages.eks.amazonaws.com/my-hello   hello-eks-anywhere   42h   installed   0.1.1-bc7dc6bb874632972cd92a2bca429a846f7aa785   0.1.1-bc7dc6bb874632972cd92a2bca429a846f7aa785 (latest)   
eksa-packages-tlhowe   package.packages.eks.amazonaws.com/my-hello   hello-eks-anywhere   44h   installed   0.1.1-083e68edbbc62ca0228a5669e89e4d3da99ff73b   0.1.1-083e68edbbc62ca0228a5669e89e4d3da99ff73b (latest)   

NAMESPACE       NAME                                                 STATE
eksa-packages   packagebundle.packages.eks.amazonaws.com/v1-21-83    available
eksa-packages   packagebundle.packages.eks.amazonaws.com/v1-23-70    available
eksa-packages   packagebundle.packages.eks.amazonaws.com/v1-23-81    available
eksa-packages   packagebundle.packages.eks.amazonaws.com/v1-23-82    available
eksa-packages   packagebundle.packages.eks.amazonaws.com/v1-23-83    available

NAMESPACE       NAME                                                        ACTIVEBUNDLE   STATE               DETAIL
eksa-packages   packagebundlecontroller.packages.eks.amazonaws.com/sammy    v1-23-70       upgrade available   v1-23-83 available
eksa-packages   packagebundlecontroller.packages.eks.amazonaws.com/tlhowe   v1-21-83       active       active   

Package controller not running

If you do not see a pod or various resources for the package controller, it may be that it is not installed.

No resources found in eksa-packages namespace.

Most likely the cluster was created with an older version of the EKS Anywhere CLI. Curated packages became generally available with v0.11.0. Use the eksctl anywhere version command to verify you are running a new enough release and you can use the eksctl anywhere install packagecontroller command to install the package controller on an older release.

Error: this command is currently not supported

Error: this command is currently not supported

Curated packages became generally available with version v0.11.0. Use the version command to make sure you are running version v0.11.0 or later:

eksctl anywhere version

Error: cert-manager is not present in the cluster

Error: curated packages cannot be installed as cert-manager is not present in the cluster

This is most likely caused by an action to install curated packages at a workload cluster with eksctl anywhere version older than v0.12.0. In order to use packages on workload clusters, please upgrade eksctl anywhere version to v0.12+. The package manager will remotely manage packages on the workload cluster from the management cluster.

Package registry authentication

Error: ImagePullBackOff on Package

If a package fails to start with ImagePullBackOff:

NAME                                     READY   STATUS             RESTARTS   AGE
generated-harbor-jobservice-564d6fdc87   0/1     ImagePullBackOff   0          2d23h

If a package pod cannot pull images, you may not have your AWS credentials set up properly. Verify that your credentials are working properly.

Make sure you are authenticated with the AWS CLI. Use the credentials you set up for packages. These credentials should have limited capabilities :

export AWS_ACCESS_KEY_ID="your*access*id"
export AWS_SECRET_ACCESS_KEY="your*secret*key"
aws sts get-caller-identity

Login to docker

aws ecr get-login-password |docker login --username AWS --password-stdin 783794618700.dkr.ecr.us-west-2.amazonaws.com

Verify you can pull an image

docker pull 783794618700.dkr.ecr.us-west-2.amazonaws.com/emissary-ingress/emissary:v3.5.1-bf70150bcdfe3a5383ec8ad9cd7eea801a0cb074

If the image downloads successfully, it worked!

You may need to create or update your credentials which you can do with a command like this. Set the environment variables to the proper values before running the command.

kubectl delete secret -n eksa-packages aws-secret
kubectl create secret -n eksa-packages generic aws-secret --from-literal=AWS_ACCESS_KEY_ID=${EKSA_AWS_ACCESS_KEY_ID} --from-literal=AWS_SECRET_ACCESS_KEY=${EKSA_AWS_SECRET_ACCESS_KEY}  --from-literal=REGION=${EKSA_AWS_REGION}

Package on workload clusters

Starting at eksctl anywhere version v0.12.0, packages on workload clusters are remotely managed by the management cluster. While interacting with the package resources by the following commands for a workload cluster, please make sure the kubeconfig is pointing to the management cluster that was used to create the workload cluster.

Package manager is not managing packages on workload cluster

If the package manager is not managing packages on a workload cluster, make sure the management cluster has various resources for the workload cluster:

kubectl get packages,packagebundles,packagebundlecontrollers -A

You should see a PackageBundleController for the workload cluster named with the name of the workload cluster and the status should be set. There should be a namespace for the workload cluster as well:

kubectl get ns | grep eksa-packages

Create a PackageBundlecController for the workload cluster if it does not exist (where billy here is the cluster name):

 cat <<! | kubectl apply -f -
apiVersion: packages.eks.amazonaws.com/v1alpha1
kind: PackageBundleController
metadata:
  name: billy
  namespace: eksa-packages
!

Workload cluster is disconnected

Cluster is disconnected:

NAMESPACE       NAME                                                        ACTIVEBUNDLE   STATE               DETAIL
eksa-packages   packagebundlecontroller.packages.eks.amazonaws.com/billy                   disconnected        initializing target client: getting kubeconfig for cluster "billy": Secret "billy-kubeconfig" not found

In the example above, the secret does not exist which may be that the management cluster is not managing the cluster, the PackageBundleController name is wrong or the secret was deleted.

This also may happen if the management cluster cannot communicate with the workload cluster or the workload cluster was deleted, although the detail would be different.

Error: the server doesn’t have a resource type “packages”

All packages are remotely managed by the management cluster, and packages, packagebundles, and packagebundlecontrollers resources are all deployed on the management cluster. Please make sure the kubeconfig is pointing to the management cluster that was used to create the workload cluster while interacting with package-related resources.

Error: packagebundlecontrollers.packages.eks.amazonaws.com “clusterName” not found

A package command run on a cluster that does not seem to be managed by the management cluster. To get a list of the clusters managed by the management cluster run the following command:

eksctl anywhere get packagebundlecontroller
NAME     ACTIVEBUNDLE   STATE     DETAIL
billy    v1-21-87       active

There will be one packagebundlecontroller for each cluster that is being managed. The only valid cluster name in the above example is billy.

11 - ADOT Configuration

OpenTelemetry Collector provides a vendor-agnostic solution to receive, process and export telemetry data. It removes the need to run, operate, and maintain multiple agents/collectors. ADOT Collector is an AWS-supported distribution of the OpenTelemetry Collector.

Best Practice

Any supported EKS Anywhere curated package should be modified through package yaml files (with kind: Package) and applied through the command kubectl apply -f packageFileName. Modifying objects outside of package yaml files may lead to unpredictable behaviors.

For automatic namespace (targetNamespace) creation, see createNamespace field: PackagebundleController.spec

Configuration options for ADOT

11.1 - ADOT with AMP and AMG

This tutorial demonstrates how to config the ADOT package to scrape metrics from an EKS Anywhere cluster, and send them to Amazon Managed Service for Prometheus (AMP) and Amazon Managed Grafana (AMG).

This tutorial walks through the following procedures:

• Create an AMP workspace ;
• Create a cluster with IAM Roles for Service Account (IRSA) ;
• Install the ADOT package ;
• Create an AMG workspace and connect to the AMP workspace .

Create an AMP workspace

An AMP workspace is created to receive metrics from the ADOT package, and respond to query requests from AMG. Follow steps below to complete the set up:

1. Open the AMP console at https://console.aws.amazon.com/prometheus/.

2. Choose region us-west-2 from the top right corner.

3. Click on Create to create a workspace.

4. Type a workspace alias (adot-amp-test as an example), and click on Create workspace.

   

5. Make notes of the URLs displayed for Endpoint - remote write URL and Endpoint - query URL. You’ll need them when you configure your ADOT package to remote write metrics to this workspace and when you query metrics from this workspace. Make sure the workspace’s Status shows Active before proceeding to the next step.

   

For additional options (i.e. through CLI) and configurations (i.e. add a tag) to create an AMP workspace, refer to AWS AMP create a workspace guide.

Create a cluster with IRSA

To enable ADOT pods that run in EKS Anywhere clusters to authenticate with AWS services, a user needs to set up IRSA at cluster creation. EKS Anywhere cluster spec for Pod IAM gives step-by-step guidance on how to do so. There are a few things to keep in mind while working through the guide:

1. While completing step Create an OIDC provider , a user should:

   • create the S3 bucket in the us-west-2 region, and

   • attach an IAM policy with proper AMP access to the IAM role.

     Below is an example that gives full access to AMP actions and resources. Refer to AMP IAM permissions and policies guide for more customized options.

     {
         "Version": "2012-10-17",
         "Statement": [
             {
                 "Action": [
                     "aps:*"
                 ],
                 "Effect": "Allow",
                 "Resource": "*"
             }
         ]
     }
     

2. While completing step deploy pod identity webhook , a user should:

   • make sure the service account is created in the same namespace as the ADOT package (which is controlled by the package definition file with field spec.targetNamespace);
   • take a note of the service account that gets created in this step as it will be used in ADOT package installation;
   • add an annotation eks.amazonaws.com/role-arn: <role-arn> to the created service account.

   By default, the service account is installed in the default namespace with name pod-identity-webhook, and the annotation eks.amazonaws.com/role-arn: <role-arn> is not added automatically.

IRSA Set Up Test

To ensure IRSA is set up properly in the cluster, a user can create an awscli pod for testing.

1. Apply the following yaml file in the cluster:

   kubectl apply -f - <<EOF
   apiVersion: v1
   kind: Pod
   metadata:
     name: awscli
   spec:
     serviceAccountName: pod-identity-webhook
     containers:
     - image: amazon/aws-cli
       command:
         - sleep
         - "infinity"
       name: awscli
       resources: {}
     dnsPolicy: ClusterFirst
     restartPolicy: Always
   EOF
   

2. Exec into the pod:

   kubectl exec -it awscli -- /bin/bash
   

3. Check if the pod can list AMP workspaces:

   aws amp list-workspaces --region=us-west-2
   

4. If the pod has issues listing AMP workspaces, re-visit IRSA set up guidance before proceeding to the next step.

5. Exit the pod:

   exit
   

Install the ADOT package

The ADOT package will be created with three components:

1. the Prometheus Receiver, which is designed to be a drop-in replacement for a Prometheus Server and is capable of scraping metrics from microservices instrumented with the Prometheus client library ;

2. the Prometheus Remote Write Exporter, which employs the remote write features and send metrics to AMP for long term storage;

3. the Sigv4 Authentication Extension, which enables ADOT pods to authenticate to AWS services.

Follow steps below to complete the ADOT package installation:

1. Update the following config file. Review comments carefully and replace everything that is wrapped with a <> tag. Note this configuration aims to mimic the Prometheus community helm chart. A user can tailor the scrape targets further by modifying the receiver section below. Refer to ADOT package spec for additional explanations of each section.

   Click to expand ADOT package config

   apiVersion: packages.eks.amazonaws.com/v1alpha1
   kind: Package
   metadata:
     name: my-adot
     namespace: eksa-packages
   spec:
     packageName: adot
     targetNamespace: default # this needs to match the namespace of the serviceAccount below
     config: |
       mode: deployment
   
       serviceAccount:
         # Specifies whether a service account should be created
         create: false
         # Annotations to add to the service account
         annotations: {}
         # Specifies the serviceAccount annotated with eks.amazonaws.com/role-arn.
         name: "pod-identity-webhook" # name of the service account created at step Create a cluster with IRSA
   
       config:
         extensions:
           sigv4auth:
             region: "us-west-2"
             service: "aps"
             assume_role:
               sts_region: "us-west-2"
   
         receivers:
           # Scrape configuration for the Prometheus Receiver
           prometheus:
             config:
               global:
                 scrape_interval: 15s
                 scrape_timeout: 10s
               scrape_configs:
               - job_name: kubernetes-apiservers
                 bearer_token_file: /var/run/secrets/kubernetes.io/serviceaccount/token
                 kubernetes_sd_configs:
                 - role: endpoints
                 relabel_configs:
                 - action: keep
                   regex: default;kubernetes;https
                   source_labels:
                   - __meta_kubernetes_namespace
                   - __meta_kubernetes_service_name
                   - __meta_kubernetes_endpoint_port_name
                 scheme: https
                 tls_config:
                   ca_file: /var/run/secrets/kubernetes.io/serviceaccount/ca.crt
                   insecure_skip_verify: false
               - job_name: kubernetes-nodes
                 bearer_token_file: /var/run/secrets/kubernetes.io/serviceaccount/token
                 kubernetes_sd_configs:
                 - role: node
                 relabel_configs:
                 - action: labelmap
                   regex: __meta_kubernetes_node_label_(.+)
                 - replacement: kubernetes.default.svc:443
                   target_label: __address__
                 - regex: (.+)
                   replacement: /api/v1/nodes/$$1/proxy/metrics
                   source_labels:
                   - __meta_kubernetes_node_name
                   target_label: __metrics_path__
                 scheme: https
                 tls_config:
                   ca_file: /var/run/secrets/kubernetes.io/serviceaccount/ca.crt
                   insecure_skip_verify: false
               - job_name: kubernetes-nodes-cadvisor
                 bearer_token_file: /var/run/secrets/kubernetes.io/serviceaccount/token
                 kubernetes_sd_configs:
                 - role: node
                 relabel_configs:
                 - action: labelmap
                   regex: __meta_kubernetes_node_label_(.+)
                 - replacement: kubernetes.default.svc:443
                   target_label: __address__
                 - regex: (.+)
                   replacement: /api/v1/nodes/$$1/proxy/metrics/cadvisor
                   source_labels:
                   - __meta_kubernetes_node_name
                   target_label: __metrics_path__
                 scheme: https
                 tls_config:
                   ca_file: /var/run/secrets/kubernetes.io/serviceaccount/ca.crt
                   insecure_skip_verify: false
               - job_name: kubernetes-service-endpoints
                 kubernetes_sd_configs:
                 - role: endpoints
                 relabel_configs:
                 - action: keep
                   regex: true
                   source_labels:
                   - __meta_kubernetes_service_annotation_prometheus_io_scrape
                 - action: replace
                   regex: (https?)
                   source_labels:
                   - __meta_kubernetes_service_annotation_prometheus_io_scheme
                   target_label: __scheme__
                 - action: replace
                   regex: (.+)
                   source_labels:
                   - __meta_kubernetes_service_annotation_prometheus_io_path
                   target_label: __metrics_path__
                 - action: replace
                   regex: ([^:]+)(?::\d+)?;(\d+)
                   replacement: $$1:$$2
                   source_labels:
                   - __address__
                   - __meta_kubernetes_service_annotation_prometheus_io_port
                   target_label: __address__
                 - action: labelmap
                   regex: __meta_kubernetes_service_annotation_prometheus_io_param_(.+)
                   replacement: __param_$$1
                 - action: labelmap
                   regex: __meta_kubernetes_service_label_(.+)
                 - action: replace
                   source_labels:
                   - __meta_kubernetes_namespace
                   target_label: kubernetes_namespace
                 - action: replace
                   source_labels:
                   - __meta_kubernetes_service_name
                   target_label: kubernetes_name
                 - action: replace
                   source_labels:
                   - __meta_kubernetes_pod_node_name
                   target_label: kubernetes_node
               - job_name: kubernetes-service-endpoints-slow
                 kubernetes_sd_configs:
                 - role: endpoints
                 relabel_configs:
                 - action: keep
                   regex: true
                   source_labels:
                   - __meta_kubernetes_service_annotation_prometheus_io_scrape_slow
                 - action: replace
                   regex: (https?)
                   source_labels:
                   - __meta_kubernetes_service_annotation_prometheus_io_scheme
                   target_label: __scheme__
                 - action: replace
                   regex: (.+)
                   source_labels:
                   - __meta_kubernetes_service_annotation_prometheus_io_path
                   target_label: __metrics_path__
                 - action: replace
                   regex: ([^:]+)(?::\d+)?;(\d+)
                   replacement: $$1:$$2
                   source_labels:
                   - __address__
                   - __meta_kubernetes_service_annotation_prometheus_io_port
                   target_label: __address__
                 - action: labelmap
                   regex: __meta_kubernetes_service_annotation_prometheus_io_param_(.+)
                   replacement: __param_$$1
                 - action: labelmap
                   regex: __meta_kubernetes_service_label_(.+)
                 - action: replace
                   source_labels:
                   - __meta_kubernetes_namespace
                   target_label: kubernetes_namespace
                 - action: replace
                   source_labels:
                   - __meta_kubernetes_service_name
                   target_label: kubernetes_name
                 - action: replace
                   source_labels:
                   - __meta_kubernetes_pod_node_name
                   target_label: kubernetes_node
                 scrape_interval: 5m
                 scrape_timeout: 30s
   
               - job_name: prometheus-pushgateway
                 kubernetes_sd_configs:
                 - role: service
                 relabel_configs:
                 - action: keep
                   regex: pushgateway
                   source_labels:
                   - __meta_kubernetes_service_annotation_prometheus_io_probe
               - job_name: kubernetes-services
                 kubernetes_sd_configs:
                 - role: service
                 metrics_path: /probe
                 params:
                   module:
                   - http_2xx
                 relabel_configs:
                 - action: keep
                   regex: true
                   source_labels:
                   - __meta_kubernetes_service_annotation_prometheus_io_probe
                 - source_labels:
                   - __address__
                   target_label: __param_target
                 - replacement: blackbox
                   target_label: __address__
                 - source_labels:
                   - __param_target
                   target_label: instance
                 - action: labelmap
                   regex: __meta_kubernetes_service_label_(.+)
                 - source_labels:
                   - __meta_kubernetes_namespace
                   target_label: kubernetes_namespace
                 - source_labels:
                   - __meta_kubernetes_service_name
                   target_label: kubernetes_name
               - job_name: kubernetes-pods
                 kubernetes_sd_configs:
                 - role: pod
                 relabel_configs:
                 - action: keep
                   regex: true
                   source_labels:
                   - __meta_kubernetes_pod_annotation_prometheus_io_scrape
                 - action: replace
                   regex: (https?)
                   source_labels:
                   - __meta_kubernetes_pod_annotation_prometheus_io_scheme
                   target_label: __scheme__
                 - action: replace
                   regex: (.+)
                   source_labels:
                   - __meta_kubernetes_pod_annotation_prometheus_io_path
                   target_label: __metrics_path__
                 - action: replace
                   regex: ([^:]+)(?::\d+)?;(\d+)
                   replacement: $$1:$$2
                   source_labels:
                   - __address__
                   - __meta_kubernetes_pod_annotation_prometheus_io_port
                   target_label: __address__
                 - action: labelmap
                   regex: __meta_kubernetes_pod_annotation_prometheus_io_param_(.+)
                   replacement: __param_$$1
                 - action: labelmap
                   regex: __meta_kubernetes_pod_label_(.+)
                 - action: replace
                   source_labels:
                   - __meta_kubernetes_namespace
                   target_label: kubernetes_namespace
                 - action: replace
                   source_labels:
                   - __meta_kubernetes_pod_name
                   target_label: kubernetes_pod_name
                 - action: drop
                   regex: Pending|Succeeded|Failed|Completed
                   source_labels:
                   - __meta_kubernetes_pod_phase
               - job_name: kubernetes-pods-slow
                 scrape_interval: 5m
                 scrape_timeout: 30s          
                 kubernetes_sd_configs:
                 - role: pod
                 relabel_configs:
                 - action: keep
                   regex: true
                   source_labels:
                   - __meta_kubernetes_pod_annotation_prometheus_io_scrape_slow
                 - action: replace
                   regex: (https?)
                   source_labels:
                   - __meta_kubernetes_pod_annotation_prometheus_io_scheme
                   target_label: __scheme__
                 - action: replace
                   regex: (.+)
                   source_labels:
                   - __meta_kubernetes_pod_annotation_prometheus_io_path
                   target_label: __metrics_path__
                 - action: replace
                   regex: ([^:]+)(?::\d+)?;(\d+)
                   replacement: $$1:$$2
                   source_labels:
                   - __address__
                   - __meta_kubernetes_pod_annotation_prometheus_io_port
                   target_label: __address__
                 - action: labelmap
                   regex: __meta_kubernetes_pod_annotation_prometheus_io_param_(.+)
                   replacement: __param_$1
                 - action: labelmap
                   regex: __meta_kubernetes_pod_label_(.+)
                 - action: replace
                   source_labels:
                   - __meta_kubernetes_namespace
                   target_label: namespace
                 - action: replace
                   source_labels:
                   - __meta_kubernetes_pod_name
                   target_label: pod
                 - action: drop
                   regex: Pending|Succeeded|Failed|Completed
                   source_labels:
                   - __meta_kubernetes_pod_phase
   
         processors:
           batch/metrics:
             timeout: 60s
   
         exporters:
           logging:
             logLevel: info
           prometheusremotewrite:
             endpoint: "<AMP-WORKSPACE>/api/v1/remote_write" # Replace with your AMP workspace
             auth:
               authenticator: sigv4auth
   
         service:
           extensions:
             - health_check
             - memory_ballast
             - sigv4auth
           pipelines:
             metrics:
               receivers: [prometheus]
               processors: [batch/metrics]
               exporters: [logging, prometheusremotewrite]    
   
   

2. Bind additional roles to the service account pod-identity-webhook (created at step Create a cluster with IRSA ) by applying the following file in the cluster (using kubectl apply -f <file-name>). This is because pod-identity-webhook by design does not have sufficient permissions to scrape all Kubernetes targets listed in the ADOT config file above. If modifications are made to the Prometheus Receiver, make updates to the file below to add / remove additional permissions before applying the file.

   Click to expand clusterrole and clusterrolebinding config

   ---
   apiVersion: rbac.authorization.k8s.io/v1
   kind: ClusterRole
   metadata:
     name: otel-prometheus-role
   rules:
     - apiGroups:
         - ""
       resources:
         - nodes
         - nodes/proxy
         - services
         - endpoints
         - pods
       verbs:
         - get
         - list
         - watch
     - apiGroups:
         - extensions
       resources:
         - ingresses
       verbs:
         - get
         - list
         - watch
     - nonResourceURLs:
         - /metrics
       verbs:
         - get
   
   ---
   apiVersion: rbac.authorization.k8s.io/v1
   kind: ClusterRoleBinding
   metadata:
     name: otel-prometheus-role-binding
   roleRef:
     apiGroup: rbac.authorization.k8s.io
     kind: ClusterRole
     name: otel-prometheus-role
   subjects:
     - kind: ServiceAccount
       name: pod-identity-webhook  # replace with name of the service account created at step Create a cluster with IRSA
       namespace: default  # replace with namespace where the service account was created at step Create a cluster with IRSA
   

3. Use the ADOT package config file defined above to complete the ADOT installation. Refer to ADOT installation guide for details.

ADOT Package Test

To ensure the ADOT package is installed correctly in the cluster, a user can perform the following tests.

Check pod logs

Check ADOT pod logs using kubectl logs <adot-pod-name> -n <namespace>. It should display logs similar to below.

...
2022-09-30T23:22:59.184Z	info	service/telemetry.go:103	Setting up own telemetry...
2022-09-30T23:22:59.184Z	info	service/telemetry.go:138	Serving Prometheus metrics	{"address": "0.0.0.0:8888", "level": "basic"}
2022-09-30T23:22:59.185Z	info	components/components.go:30	In development component. May change in the future.	{"kind": "exporter", "data_type": "metrics", "name": "logging", "stability": "in development"}
2022-09-30T23:22:59.186Z	info	extensions/extensions.go:42	Starting extensions...
2022-09-30T23:22:59.186Z	info	extensions/extensions.go:45	Extension is starting...	{"kind": "extension", "name": "health_check"}
2022-09-30T23:22:59.186Z	info	healthcheckextension@v0.58.0/healthcheckextension.go:44	Starting health_check extension	{"kind": "extension", "name": "health_check", "config": {"Endpoint":"0.0.0.0:13133","TLSSetting":null,"CORS":null,"Auth":null,"MaxRequestBodySize":0,"IncludeMetadata":false,"Path":"/","CheckCollectorPipeline":{"Enabled":false,"Interval":"5m","ExporterFailureThreshold":5}}}
2022-09-30T23:22:59.186Z	info	extensions/extensions.go:49	Extension started.	{"kind": "extension", "name": "health_check"}
2022-09-30T23:22:59.186Z	info	extensions/extensions.go:45	Extension is starting...	{"kind": "extension", "name": "memory_ballast"}
2022-09-30T23:22:59.187Z	info	ballastextension/memory_ballast.go:52	Setting memory ballast	{"kind": "extension", "name": "memory_ballast", "MiBs": 0}
2022-09-30T23:22:59.187Z	info	extensions/extensions.go:49	Extension started.	{"kind": "extension", "name": "memory_ballast"}
2022-09-30T23:22:59.187Z	info	extensions/extensions.go:45	Extension is starting...	{"kind": "extension", "name": "sigv4auth"}
2022-09-30T23:22:59.187Z	info	extensions/extensions.go:49	Extension started.	{"kind": "extension", "name": "sigv4auth"}
2022-09-30T23:22:59.187Z	info	pipelines/pipelines.go:74	Starting exporters...
2022-09-30T23:22:59.187Z	info	pipelines/pipelines.go:78	Exporter is starting...	{"kind": "exporter", "data_type": "metrics", "name": "logging"}
2022-09-30T23:22:59.187Z	info	pipelines/pipelines.go:82	Exporter started.	{"kind": "exporter", "data_type": "metrics", "name": "logging"}
2022-09-30T23:22:59.187Z	info	pipelines/pipelines.go:78	Exporter is starting...	{"kind": "exporter", "data_type": "metrics", "name": "prometheusremotewrite"}
2022-09-30T23:22:59.187Z	info	pipelines/pipelines.go:82	Exporter started.	{"kind": "exporter", "data_type": "metrics", "name": "prometheusremotewrite"}
2022-09-30T23:22:59.187Z	info	pipelines/pipelines.go:86	Starting processors...
2022-09-30T23:22:59.187Z	info	pipelines/pipelines.go:90	Processor is starting...	{"kind": "processor", "name": "batch/metrics", "pipeline": "metrics"}
2022-09-30T23:22:59.187Z	info	pipelines/pipelines.go:94	Processor started.	{"kind": "processor", "name": "batch/metrics", "pipeline": "metrics"}
2022-09-30T23:22:59.187Z	info	pipelines/pipelines.go:98	Starting receivers...
2022-09-30T23:22:59.187Z	info	pipelines/pipelines.go:102	Receiver is starting...	{"kind": "receiver", "name": "prometheus", "pipeline": "metrics"}
2022-09-30T23:22:59.187Z	info	kubernetes/kubernetes.go:326	Using pod service account via in-cluster config	{"kind": "receiver", "name": "prometheus", "pipeline": "metrics", "discovery": "kubernetes"}
2022-09-30T23:22:59.188Z	info	kubernetes/kubernetes.go:326	Using pod service account via in-cluster config	{"kind": "receiver", "name": "prometheus", "pipeline": "metrics", "discovery": "kubernetes"}
2022-09-30T23:22:59.188Z	info	kubernetes/kubernetes.go:326	Using pod service account via in-cluster config	{"kind": "receiver", "name": "prometheus", "pipeline": "metrics", "discovery": "kubernetes"}
2022-09-30T23:22:59.188Z	info	kubernetes/kubernetes.go:326	Using pod service account via in-cluster config	{"kind": "receiver", "name": "prometheus", "pipeline": "metrics", "discovery": "kubernetes"}
2022-09-30T23:22:59.189Z	info	pipelines/pipelines.go:106	Receiver started.	{"kind": "receiver", "name": "prometheus", "pipeline": "metrics"}
2022-09-30T23:22:59.189Z	info	healthcheck/handler.go:129	Health Check state change	{"kind": "extension", "name": "health_check", "status": "ready"}
2022-09-30T23:22:59.189Z	info	service/collector.go:215	Starting aws-otel-collector...	{"Version": "v0.21.1", "NumCPU": 2}
2022-09-30T23:22:59.189Z	info	service/collector.go:128	Everything is ready. Begin running and processing data.
...

Check AMP endpoint using awscurl

Use awscurl commands below to check if AMP received the metrics data sent by ADOT. The awscurl tool is a curl like tool with AWS Signature Version 4 request signing. The command below should return a status code success.

pip install awscurl
awscurl -X POST --region us-west-2 --service aps "<amp-query-endpoint>?query=up"

Create an AMG workspace and connect to the AMP workspace

An AMG workspace is created to query metrics from the AMP workspace and visualize the metrics in user-selected or user-built dashboards.

Follow steps below to create the AMG workspace:

1. Enable AWS Single-Sign-on (AWS SSO). Refer to IAM Identity Center for details.

2. Open the Amazon Managed Grafana console at https://console.aws.amazon.com/grafana/.

3. Choose Create workspace.

4. In the Workspace details window, for Workspace name, enter a name for the workspace.

   

5. In the config settings window, choose Authentication access by AWS IAM Identity Center, and Permission type of Service managed.

   

6. In the IAM permission access setting window, choose Current account access, and Amazon Managed Service for Prometheus as data source.

   

7. Review all settings and click on Create workspace.

   

8. Once the workspace shows a Status of Active, you can access it by clicking the Grafana workspace URL. Click on Sign in with AWS IAM Identity Center to finish the authentication.

Follow steps below to add the AMP workspace to AMG.

1. Click on the config sign on the left navigation bar, select Data sources, then choose Prometheus as the Data source.

   

2. Configure Prometheus data source with the following details:

   • Name: AMPDataSource as an example.
   • URL: add the AMP workspace remote write URL without the api/v1/remote_write at the end.
   • SigV4 auth: enable.
   • Under the SigV4 Auth Details section:
     • Authentication Provider: choose Workspace IAM Role;
     • Default Region: choose us-west-2 (where you created the AMP workspace)
   • Select the Save and test, and a notification data source is working should be displayed.

   

3. Import a dashboard template by clicking on the plus (+) sign on the left navigation bar. In the Import screen, type 3119 in the Import via grafana.com textbox and select Import. From the dropdown at the bottom, select AMPDataSource and select Import.

   

4. A Kubernetes cluster monitoring (via Prometheus) dashboard will be displayed.

   

11.2 - AWS Distro for OpenTelemetry (ADOT)

If you have not already done so, make sure your cluster meets the package prerequisites. Be sure to refer to the troubleshooting guide in the event of a problem.

Install

1. Generate the package configuration

   eksctl anywhere generate package adot --cluster <cluster-name> > adot.yaml
   

2. Add the desired configuration to adot.yaml

   Please see complete configuration options for all configuration options and their default values.

   Example package file with daemonSet mode and default configuration:

    apiVersion: packages.eks.amazonaws.com/v1alpha1
    kind: Package
    metadata:
      name: my-adot
      namespace: eksa-packages-<cluster-name>
    spec:
      packageName: adot
      targetNamespace: observability
      config: | 
        mode: daemonset
   

   Example package file with deployment mode and customized collector components to scrap ADOT collector’s own metrics:

    apiVersion: packages.eks.amazonaws.com/v1alpha1
    kind: Package
    metadata:
      name: my-adot
      namespace: eksa-packages-<cluster-name>
    spec:
      packageName: adot
      targetNamespace: observability
      config: | 
        mode: deployment
        replicaCount: 2
        config:
          receivers:
            prometheus:
              config:
                scrape_configs:
                  - job_name: opentelemetry-collector
                    scrape_interval: 10s
                    static_configs:
                      - targets:
                          - ${MY_POD_IP}:8888
          processors:
            batch: {}
            memory_limiter: null
          exporters:
            logging:
              loglevel: debug
            prometheusremotewrite:
              endpoint: "<prometheus-remote-write-end-point>"
          extensions:
            health_check: {}
            memory_ballast: {}
          service:
            pipelines:
              metrics:
                receivers: [prometheus]
                processors: [batch]
                exporters: [logging, prometheusremotewrite]
            telemetry:
              metrics:
                address: 0.0.0.0:8888
   

3. Create the namespace (If overriding targetNamespace, change observability to the value of targetNamespace)

   kubectl create namespace observability
   

4. Install adot

   eksctl anywhere create packages -f adot.yaml
   

5. Validate the installation

   eksctl anywhere get packages --cluster <cluster-name>
   

   Example command output

   NAME   PACKAGE   AGE   STATE       CURRENTVERSION                                                            TARGETVERSION                                                                   DETAIL
   my-adot   adot   19h   installed   0.25.0-c26690f90d38811dbb0e3dad5aea77d1efa52c7b   0.25.0-c26690f90d38811dbb0e3dad5aea77d1efa52c7b (latest)
   

Update

To update package configuration, update adot.yaml file, and run the following command:

eksctl anywhere apply package -f adot.yaml

Upgrade

ADOT will automatically be upgraded when a new bundle is activated.

Uninstall

To uninstall ADOT, simply delete the package

eksctl anywhere delete package --cluster <cluster-name> my-adot

11.3 - v0.21.1

Configuring ADOT in EKS Anywhere package spec

Example

We included a sample configuration below for reference. For in-depth examples and use cases, please refer to ADOT with AMP and AMG.

apiVersion: packages.eks.amazonaws.com/v1alpha1
kind: Package
metadata:
  name: my-adot
  namespace: eksa-packages-<cluster-name>
spec:
  packageName: adot
  targetNamespace: observability
  config: | 
    mode: daemonset

Configurable parameters and default values under spec.config

11.4 - v0.23.0

Configuring ADOT in EKS Anywhere package spec

Example

We included a sample configuration below for reference. For in-depth examples and use cases, please refer to ADOT with AMP and AMG.

apiVersion: packages.eks.amazonaws.com/v1alpha1
kind: Package
metadata:
  name: my-adot
  namespace: eksa-packages-<cluster-name>
spec:
  packageName: adot
  targetNamespace: observability
  config: | 
    mode: daemonset

Configurable parameters and default values under spec.config

11.5 - v0.25.0

Configuring ADOT in EKS Anywhere package spec

Example

We included a sample configuration below for reference. For in-depth examples and use cases, please refer to ADOT with AMP and AMG.

apiVersion: packages.eks.amazonaws.com/v1alpha1
kind: Package
metadata:
  name: my-adot
  namespace: eksa-packages-<cluster-name>
spec:
  packageName: adot
  targetNamespace: observability
  config: | 
    mode: daemonset

Configurable parameters and default values under spec.config

11.6 - v0.39.0

Configuring ADOT in EKS Anywhere package spec

Example

We included a sample configuration below for reference. For in-depth examples and use cases, please refer to ADOT with AMP and AMG.

apiVersion: packages.eks.amazonaws.com/v1alpha1
kind: Package
metadata:
  name: my-adot
  namespace: eksa-packages-<cluster-name>
spec:
  packageName: adot
  targetNamespace: observability
  config: | 
    mode: daemonset

Configurable parameters and default values under spec.config

11.7 - v0.41.1

Configuring ADOT in EKS Anywhere package spec

Example

We included a sample configuration below for reference. For in-depth examples and use cases, please refer to ADOT with AMP and AMG.

apiVersion: packages.eks.amazonaws.com/v1alpha1
kind: Package
metadata:
  name: my-adot
  namespace: eksa-packages-<cluster-name>
spec:
  packageName: adot
  targetNamespace: observability
  config: |
    mode: daemonset

Configurable parameters and default values under spec.config

12 - Cert-Manager Configuration

The cert-manager package adds certificates and certificate issuers as resource types in Kubernetes clusters, and simplifies the process of obtaining, renewing and using those certificates.

Best Practice

Any supported EKS Anywhere curated package should be modified through package yaml files (with kind: Package) and applied through the command kubectl apply -f packageFileName. Modifying objects outside of package yaml files may lead to unpredictable behaviors.

For automatic namespace (targetNamespace) creation, see createNamespace field: PackagebundleController.spec

Configuration options for Cert-Manager

12.1 - Cert-Manager

If you have not already done so, make sure your cluster meets the package prerequisites. Be sure to refer to the troubleshooting guide in the event of a problem.

Install on workload cluster

NOTE: The cert-manager package can only be installed on a workload cluster

1. Generate the package configuration

   eksctl anywhere generate package cert-manager --cluster <cluster-name> > cert-manager.yaml
   

2. Add the desired configuration to cert-manager.yaml

   Please see complete configuration options for all configuration options and their default values.

   Example package file configuring a cert-manager package to run on a workload cluster.

   apiVersion: packages.eks.amazonaws.com/v1alpha1
   kind: Package
   metadata:
     name: my-cert-manager
     namespace: eksa-packages-<cluster-name>
   spec:
     packageName: cert-manager
     targetNamespace: <namespace-to-install-component>
   

3. Install Cert-Manager

   eksctl anywhere create packages -f cert-manager.yaml
   

4. Validate the installation

   eksctl anywhere get packages --cluster <cluster-name>
   

   Example command output

   NAME                          PACKAGE              AGE   STATE       CURRENTVERSION                                               TARGETVERSION                                                         DETAIL
   my-cert-manager               cert-manager         15s   installed   1.9.1-dc0c845b5f71bea6869efccd3ca3f2dd11b5c95f               1.9.1-dc0c845b5f71bea6869efccd3ca3f2dd11b5c95f (latest)
   

Update

To update package configuration, update cert-manager.yaml file, and run the following command:

eksctl anywhere apply package -f cert-manager.yaml

Upgrade

Cert-Manager will automatically be upgraded when a new bundle is activated.

Uninstall

To uninstall cert-manager, simply delete the package

eksctl anywhere delete package --cluster <cluster-name> cert-manager

12.2 - v1.9.1

Configuring Cert-Manager in EKS Anywhere package spec

Example

apiVersion: packages.eks.amazonaws.com/v1alpha1
kind: Package
metadata:
  name: my-cert-manager
  namespace: eksa-packages-<cluster-name>
spec:
  packageName: cert-manager
  config: | 
    global:
        logLevel: 4

The following table lists the configurable parameters of the cert-manager package spec and the default values.

12.3 - v1.14.5

Configuring Cert-Manager in EKS Anywhere package spec

Example

apiVersion: packages.eks.amazonaws.com/v1alpha1
kind: Package
metadata:
  name: my-cert-manager
  namespace: eksa-packages-<cluster-name>
spec:
  packageName: cert-manager
  config: | 
    global:
        logLevel: 4

The following table lists the configurable parameters of the cert-manager package spec and the default values.

12.4 - v1.15.3

Configuring Cert-Manager in EKS Anywhere package spec

Example

apiVersion: packages.eks.amazonaws.com/v1alpha1
kind: Package
metadata:
  name: my-cert-manager
  namespace: eksa-packages-<cluster-name>
spec:
  packageName: cert-manager
  config: |
    global:
        logLevel: 4

The following table lists the configurable parameters of the cert-manager package spec and the default values.

13 - Cluster Autoscaler Configuration

Cluster Autoscaler is a component that automatically adjusts the size of a Kubernetes Cluster so that all pods have a place to run and there are no unneeded nodes.

Configuration options for Cluster Autoscaler

13.1 - Cluster Autoscaler

If you have not already done so, make sure your EKS Anywhere cluster meets the package prerequisites.

Refer to the troubleshooting guide in the event of a problem.

Enable Cluster Autoscaling

1. Ensure you have configured at least one worker node group in your cluster specification to enable autoscaling as outlined in Autoscaling configuration. Cluster Autoscaler only works on node groups with an autoscalingConfiguration set:

   apiVersion: anywhere.eks.amazonaws.com/v1alpha1
   kind: Cluster
   metadata:
     name: <cluster-name>
   spec:
     ...
     workerNodeGroupConfigurations:
       - autoscalingConfiguration:
           minCount: 1
           maxCount: 5
         machineGroupRef:
           kind: VSphereMachineConfig
           name: <worker-machine-config-name>
         count: 1
         name: md-0
   

2. Generate the package configuration.

   eksctl anywhere generate package cluster-autoscaler --cluster <cluster-name> > cluster-autoscaler.yaml
   

3. Add the desired configuration to cluster-autoscaler.yaml. See configuration options for all configuration options and their default values. See below for an example package file configuring a Cluster Autoscaler package.

   apiVersion: packages.eks.amazonaws.com/v1alpha1
   kind: Package
   metadata:
     name: cluster-autoscaler-<cluster-name>
     namespace: eksa-packages-<cluster-name>
   spec:
     packageName: cluster-autoscaler
     targetNamespace: default
     config: |-
         cloudProvider: "clusterapi"
         autoDiscovery:
           clusterName: "<cluster-name>"      
   

4. Install Cluster Autoscaler

   eksctl anywhere create packages -f cluster-autoscaler.yaml
   

5. Validate the installation

   eksctl anywhere get packages --cluster <cluster-name>
   

   NAMESPACE                  NAME                          PACKAGE              AGE   STATE       CURRENTVERSION                                               TARGETVERSION                                                         DETAIL
   eksa-packages-mgmt-v-vmc   cluster-autoscaler            cluster-autoscaler   18h   installed   9.21.0-1.21-147e2a701f6ab625452fe311d5c94a167270f365         9.21.0-1.21-147e2a701f6ab625452fe311d5c94a167270f365 (latest)
   

   To verify that autoscaling works, apply the deployment below. You must continue scaling pods until the deployment has pods in a pending state. This is when Cluster Autoscaler will begin to autoscale your machine deployment. This process may take a few minutes.

   kubectl apply -f https://raw.githubusercontent.com/aws/eks-anywhere/d8575bbd2a85a6c6bbcb1a54868cf7790df56a63/test/framework/testdata/hpa_busybox.yaml
   kubectl scale deployment hpa-busybox-test --replicas 100
   

Update

To update package configuration, update the cluster-autoscaler.yaml file and run the following command:

eksctl anywhere apply package -f cluster-autoscaler.yaml

Update Worker Node Group Autoscaling Configuration

It is possible to change the autoscaling configuration of a worker node group by updating the autoscalingConfiguration in your cluster specification and running a cluster upgrade.

Upgrade

The Cluster Autoscaler can be upgraded by PackageController’s activeBundle field to a newer version. The curated packages bundle contains the SHAs of the images and helm charts associated with a particular package. When a new version is activated, the Package Controller will reconcile all active packages to their newest versions as defined in the bundle. The Curated Packages Controller automatically polls the bundle repository for new bundle resources. The curated packages controller automatically polls for the latest bundle, but requires the activeBundle field on the PackageController resource to be updated before a new bundle will take effect and upgrade the resources.

Uninstall

To uninstall Cluster Autoscaler, delete the package

eksctl anywhere delete package --cluster <cluster-name> cluster-autoscaler

13.2 - v9.21.0

Configuring Cluster Autoscaler in EKS Anywhere package spec

cloudProvider: “clusterapi”

autoDiscovery.clusterName: “mgmt-cluster”

clusterAPIMode: “incluster-kubeconfig”

clusterAPICloudConfigPath: “/etc/kubernetes/value”

extraVolumeSecrets: {}

13.3 - v9.37.0

Configuring Cluster Autoscaler in EKS Anywhere package spec

cloudProvider: “clusterapi”

autoDiscovery.clusterName: “mgmt-cluster”

clusterAPIMode: “incluster-kubeconfig”

clusterAPICloudConfigPath: “/etc/kubernetes/value”

extraVolumeSecrets: {}

13.4 - v9.43.0

Configuring Cluster Autoscaler in EKS Anywhere package spec

cloudProvider: “clusterapi”

autoDiscovery.clusterName: “mgmt-cluster”

clusterAPIMode: “incluster-kubeconfig”

clusterAPICloudConfigPath: “/etc/kubernetes/value”

extraVolumeSecrets: {}

14 - Credential Provider Package Configuration

Credential provider package provides a solution to authenticate with private Amazon Elastic Container Registry by utilizing the kubelet image credential provider

Best Practice

Any supported EKS Anywhere curated package should be modified through package yaml files (with kind: Package) and applied through the command kubectl apply -f packageFileName. Modifying objects outside of package yaml files may lead to unpredictable behaviors.

For automatic namespace (targetNamespace) creation, see createNamespace field: PackagebundleController.spec

Configuration options for Credential-Provider-Package

14.1 - Credential Provider Package with IAM Roles Anywhere

This tutorial demonstrates how to configure the credential provider package to authenticate using IAM Roles Anywhere to pull from a private AWS Elastic Container Registry (ECR).
IAM Roles Anywhere enables workloads outside of AWS to access AWS resources by using X.509 digital certificates to obtain temporary AWS credentials. A trust anchor is used to reference a certificate authority with IAM Roles Anywhere. For this use case, the Kubernetes Cluster CA can be registered and each kubelet client’s x509 cert can be used to authenticate to get temporary AWS credentials.

Prerequisites

1. For setting up the certificate authority later, you will need to obtain your cluster’s CA. This can be obtain by:

   # Assuming CLUSTER_NAME and KUBECONFIG are set:
   kubectl get secret -n eksa-system ${CLUSTER_NAME}-ca -o yaml | yq '.data."tls.crt"' | base64 -d
   

2. A role should be created to allow read access for curated packages. This role can be extended to include private registries that you would also like to pull from into your cluster. A sample policy for curated packages would be.

   {
    "Version": "2012-10-17",
    "Statement": [
        {
            "Sid": "ECRRead",
            "Effect": "Allow",
            "Action": [
                "ecr:DescribeImageScanFindings",
                "ecr:GetDownloadUrlForLayer",
                "ecr:DescribeRegistry",
                "ecr:DescribePullThroughCacheRules",
                "ecr:DescribeImageReplicationStatus",
                "ecr:ListTagsForResource",
                "ecr:ListImages",
                "ecr:BatchGetImage",
                "ecr:DescribeImages",
                "ecr:DescribeRepositories",
                "ecr:BatchCheckLayerAvailability"
            ],
            "Resource": "arn:aws:ecr:*:783794618700:repository/*"
        },
        {
            "Sid": "ECRLogin",
            "Effect": "Allow",
            "Action": [
                "ecr:GetAuthorizationToken"
            ],
            "Resource": "*"
        }
     ]
    }
   

3. Next create a trust anchor and profile. The trust anchor will be a reference to the CA certificate from step 1 and the profile should point to the role created in step 2. See here for instructions on creating the trust anchor and profile.

4. Create a secret that will be referenced by the credential-provider-package to authenticate the kubelet with ECR.

   # Set PROFILE_ARN, ROLE_ARN, and TRUST_ANCHOR_ARN obtained in previous step
   # Set AWS_REGION to region to pull images from
   # This will create a file credfile which will then be turned into a secret
   cat << EOF >> credfile
   [default]
   region = $AWS_REGION
   credential_process = aws_signing_helper credential-process --certificate /var/lib/kubelet/pki/kubelet-client-current.pem --private-key /var/lib/kubelet/pki/kubelet-client-current.pem --profile-arn $PROFILE_ARN --role-arn $ROLE_ARN --trust-anchor-arn $TRUST_ANCHOR_ARN
   EOF
   
   # Create secret, for this example the secret name aws-config is used and the package will be installed in eksa-packages
   kubectl create secret generic aws-config --from-file=config=credfile -n eksa-packages
   

5. Either edit the existing package or delete and create a new credential-provider-package that points towards the new secret. For more information on specific configuration option refer to installation guide for details]
   The example below changes the default secret name from aws-secret to newly created aws-config. It also changes the match images to pull from multiple regions as well as across multiple accounts. Make sure to change cluster-name to match your CLUSTER_NAME

   apiVersion: packages.eks.amazonaws.com/v1alpha1
   kind: Package
   metadata:
     name: my-credential-provider-package
     namespace: eksa-packages-<clusterName>
     annotations:
       "helm.sh/resource-policy": keep
       "anywhere.eks.aws.com/internal": "true"
   spec:
     packageName: credential-provider-package
     targetNamespace: eksa-packages
     config: |-
       tolerations:
         - key: "node-role.kubernetes.io/master"
           operator: "Exists"
           effect: "NoSchedule"
         - key: "node-role.kubernetes.io/control-plane"
           operator: "Exists"
           effect: "NoSchedule"
       sourceRegistry: public.ecr.aws/eks-anywhere
       credential:
         - matchImages:
           - *.dkr.ecr.*.amazonaws.com
           profile: "default"
           secretName: aws-config
           defaultCacheDuration: "5h"    
   

14.2 - Credential Provider Package

If you have not already done so, make sure your cluster meets the package prerequisites. Be sure to refer to the troubleshooting guide in the event of a problem.

Install

By default an instance of this package is installed with the controller to help facilitate authentication for other packages. The following are instructions in case you want to tweak the default values.

1. Generate the package configuration

   eksctl anywhere generate package credential-provider-package --cluster <cluster-name> > credential-provider-package.yaml
   

2. Add the desired configuration to credential-provider-package.yaml Please see complete configuration options for all configuration options and their default values. Example default package using IAM User Credentials installed with the controller

   apiVersion: packages.eks.amazonaws.com/v1alpha1
   kind: Package
   metadata:
     name: my-credential-provider-package
     namespace: eksa-packages-<clusterName>
     annotations:
       "helm.sh/resource-policy": keep
       "anywhere.eks.aws.com/internal": "true"
   spec:
     packageName: credential-provider-package
     targetNamespace: eksa-packages
     config: |-
       tolerations:
         - key: "node-role.kubernetes.io/master"
           operator: "Exists"
           effect: "NoSchedule"
         - key: "node-role.kubernetes.io/control-plane"
           operator: "Exists"
           effect: "NoSchedule"
       sourceRegistry: public.ecr.aws/eks-anywhere
       credential:
         - matchImages:
           - 783794618700.dkr.ecr.us-west-2.amazonaws.com
           profile: "default"
           secretName: aws-secret
           defaultCacheDuration: "5h"
   

3. Create the secret. If you are changing the secret, see complete configuration options for the format of the secret.

4. Create the namespace (if not installing to eksa-packages). If you are overriding targetNamespace, change eksa-packages to the value of targetNamespace.

   kubectl create namespace <namespace-name-here>
   

5. Install the credential-provider-package

   eksctl anywhere create packages -f credential-provider-package.yaml
   

6. Validate the installation

   eksctl anywhere get packages --cluster <cluster-name>
   

Update

To update package configuration, update credential-provider-package.yaml file and run the following command:

eksctl anywhere apply package -f credential-provider-package.yaml

Upgrade

Credential-Provider-Package will automatically be upgraded when a new bundle is activated.

Uninstall

To uninstall credential-provider-package, simply delete the package:

eksctl anywhere delete package --cluster <cluster-name> my-credential-provider-package

14.3 - v0.1.0

Configuring Credential Provider Package in EKS Anywhere package spec

Example

The following is the sample configuration for the credential provider package that is installed by default with the package controller. Please refer to Credential Provider Package with IAM Roles Anywhere.

apiVersion: packages.eks.amazonaws.com/v1alpha1
kind: Package
metadata:
  name: ecr-credential-provider-package
  namespace: eksa-packages-<clusterName>
  annotations:
    "helm.sh/resource-policy": keep
    "anywhere.eks.aws.com/internal": "true"
spec:
  packageName: credential-provider-package
  targetNamespace: eksa-packages
  config: |-
    tolerations:
      - key: "node-role.kubernetes.io/master"
        operator: "Exists"
        effect: "NoSchedule"
      - key: "node-role.kubernetes.io/control-plane"
        operator: "Exists"
        effect: "NoSchedule"
    sourceRegistry: public.ecr.aws/eks-anywhere
    credential:
      - matchImages:
        - 783794618700.dkr.ecr.us-west-2.amazonaws.com
        profile: "default"
        secretName: aws-secret
        defaultCacheDuration: "5h"

In this example, the credential provider will use the secret provided in aws-secret (created automatically on cluster creation) to authenticate to the repository from which curated package images are pulled. Tolerations were also added so that the control plane nodes would also be configured with authentication.

The secret can exist in two forms: either a base64 encoding of a credential config or individual keys for fields.

Example credential

[default]
aws_access_key_id=EXAMPLE_ACCESS_KEY
aws_secret_access_key=EXAMPLE_SECRET_KEY
region=us-west-2

Example secret with separate keys

apiVersion: v1
kind: Secret
metadata:
  name: aws-secret
  namespace: eksa-packages
data:
  AWS_ACCESS_KEY_ID: "QUtJQUlPU0ZPRE5ON0VYQU1QTEUK"
  AWS_SECRET_ACCESS_KEY: "d0phbHJYVXRuRkVNSS9LN01ERU5HL2JQeFJmaUNZRVhBTVBMRUtFWQo="
  REGION: dXMtd2VzdC0yCg==

Example secret in config form

apiVersion: v1
kind: Secret
metadata:
  name: aws-secret
  namespace: eksa-packages
data:
  config: W2RlZmF1bHRdCmF3c19hY2Nlc3Nfa2V5X2lkPUFLSUFJT1NGT0ROTjdFWEFNUExFCmF3c19zZWNyZXRfYWNjZXNzX2tleT13SmFsclhVdG5GRU1JL0s3TURFTkcvYlB4UmZpQ1lFWEFNUExFS0VZCnJlZ2lvbj11cy13ZXN0LTI=
type: Opaque

Configurable parameters and default values under spec.config

credential: 
  - secretName: “aws-secret”
    matchImages: []
    defaultCacheDuration: “1h”
    profile: “default

14.4 - v0.4.4

Configuring Credential Provider Package in EKS Anywhere package spec

Example

The following is the sample configuration for the credential provider package that is installed by default with the package controller. Please refer to Credential Provider Package with IAM Roles Anywhere.

apiVersion: packages.eks.amazonaws.com/v1alpha1
kind: Package
metadata:
  name: ecr-credential-provider-package
  namespace: eksa-packages-<clusterName>
  annotations:
    "helm.sh/resource-policy": keep
    "anywhere.eks.aws.com/internal": "true"
spec:
  packageName: credential-provider-package
  targetNamespace: eksa-packages
  config: |-
    tolerations:
      - key: "node-role.kubernetes.io/master"
        operator: "Exists"
        effect: "NoSchedule"
      - key: "node-role.kubernetes.io/control-plane"
        operator: "Exists"
        effect: "NoSchedule"
    sourceRegistry: public.ecr.aws/eks-anywhere
    credential:
      - matchImages:
        - 783794618700.dkr.ecr.us-west-2.amazonaws.com
        profile: "default"
        secretName: aws-secret
        defaultCacheDuration: "5h"

In this example, the credential provider will use the secret provided in aws-secret (created automatically on cluster creation) to authenticate to the repository from which curated package images are pulled. Tolerations were also added so that the control plane nodes would also be configured with authentication.

The secret can exist in two forms: either a base64 encoding of a credential config or individual keys for fields.

Example credential

[default]
aws_access_key_id=EXAMPLE_ACCESS_KEY
aws_secret_access_key=EXAMPLE_SECRET_KEY
region=us-west-2

Example secret with separate keys

apiVersion: v1
kind: Secret
metadata:
  name: aws-secret
  namespace: eksa-packages
data:
  AWS_ACCESS_KEY_ID: "QUtJQUlPU0ZPRE5ON0VYQU1QTEUK"
  AWS_SECRET_ACCESS_KEY: "d0phbHJYVXRuRkVNSS9LN01ERU5HL2JQeFJmaUNZRVhBTVBMRUtFWQo="
  REGION: dXMtd2VzdC0yCg==

Example secret in config form

apiVersion: v1
kind: Secret
metadata:
  name: aws-secret
  namespace: eksa-packages
data:
  config: W2RlZmF1bHRdCmF3c19hY2Nlc3Nfa2V5X2lkPUFLSUFJT1NGT0ROTjdFWEFNUExFCmF3c19zZWNyZXRfYWNjZXNzX2tleT13SmFsclhVdG5GRU1JL0s3TURFTkcvYlB4UmZpQ1lFWEFNUExFS0VZCnJlZ2lvbj11cy13ZXN0LTI=
type: Opaque

Configurable parameters and default values under spec.config

credential: 
  - secretName: “aws-secret”
    matchImages: []
    defaultCacheDuration: “1h”
    profile: “default

15 - Emissary Configuration

Emissary Ingress is an open-source Kubernetes-native API Gateway + Layer 7 load balancer + Kubernetes Ingress built on Envoy Proxy.

Best Practice

Any supported EKS Anywhere curated package should be modified through package yaml files (with kind: Package) and applied through the command kubectl apply -f packageFileName. Modifying objects outside of package yaml files may lead to unpredictable behaviors.

For automatic namespace (targetNamespace) creation, see createNamespace field: PackagebundleController.spec

Configuration options for Emissary

15.1 - Emissary Ingress

If you have not already done so, make sure your cluster meets the package prerequisites. Be sure to refer to the troubleshooting guide in the event of a problem.

Install

1. Generate the package configuration

   eksctl anywhere generate package emissary --cluster <cluster-name> > emissary.yaml
   

2. Add the desired configuration to emissary.yaml

   Please see complete configuration options for all configuration options and their default values.

   Example package file with standard configuration.

   apiVersion: packages.eks.amazonaws.com/v1alpha1
   kind: Package
   metadata:
     name: emissary
     namespace: eksa-packages-<cluster-name>
   spec:
     packageName: emissary
   

3. Install Emissary

   eksctl anywhere create packages -f emissary.yaml
   

4. Validate the installation

   eksctl anywhere get packages --cluster <cluster-name>
   

   Example command output

   NAMESPACE     NAME       PACKAGE    AGE     STATE       CURRENTVERSION                                   TARGETVERSION                                              DETAIL
   eksa-packages emissary   emissary   2m57s   installed   3.0.0-a507e09c2a92c83d65737835f6bac03b9b341467   3.0.0-a507e09c2a92c83d65737835f6bac03b9b341467 (latest)
   

Update

To update package configuration, update emissary.yaml file, and run the following command:

eksctl anywhere apply package -f emissary.yaml

Upgrade

Emissary will automatically be upgraded when a new bundle is activated.

Uninstall

To uninstall Emissary, simply delete the package

eksctl anywhere delete package --cluster <cluster-name> emissary

15.2 - v3.0.0

Configuring Emissary Ingress in EKS Anywhere package spec

hostNetwork: false

createDefaultListeners: false

replicaCount: 2

daemonSet: false

15.3 - v3.3.0

Configuring Emissary Ingress in EKS Anywhere package spec

hostNetwork: false

createDefaultListeners: false

replicaCount: 2

daemonSet: false

15.4 - v3.9.1

Configuring Emissary Ingress in EKS Anywhere package spec

hostNetwork: false

createDefaultListeners: false

replicaCount: 2

daemonSet: false

16 - Harbor Configuration

Harbor is an open source trusted cloud native registry project that stores, signs, and scans content. Harbor extends the open source Docker Distribution by adding the functionalities usually required by users such as security, identity and management. Having a registry closer to the build and run environment can improve the image transfer efficiency. Harbor supports replication of images between registries, and also offers advanced security features such as user management, access control and activity auditing. For EKS Anywhere deployments, common use cases for Harbor include:

• Supporting Airgapped environments.
• Running a registry mirror that is closer to the build and run environment to improve the image transfer efficiency.
• Following any company policies around image locality.

For additional Harbor use cases see Harbor use cases .

Best Practice

Any supported EKS Anywhere curated package should be modified through package yaml files (with kind: Package) and applied through the command kubectl apply -f packageFileName. Modifying objects outside of package yaml files may lead to unpredictable behaviors.

For automatic namespace (targetNamespace) creation, see createNamespace field: PackagebundleController.spec

Configuration options for Harbor

16.1 - Harbor

If you have not already done so, make sure your cluster meets the package prerequisites. Be sure to refer to the troubleshooting guide in the event of a problem.

Install

1. Set the KUBECONFIG environment variable to use the config of the management cluster

   export KUBECONFIG=<path to management cluster kubeconfig>
   

2. Generate the package configuration

   eksctl anywhere generate package harbor --cluster <cluster-name> > harbor.yaml
   

3. Add the desired configuration to harbor.yaml

   Please see complete configuration options for all configuration options and their default values.

   Important

   • All configuration options are listed in dot notations (e.g., expose.tls.enabled) in the doc, but they have to be transformed to hierachical structures when specified in the config section in the YAML spec.
   • Harbor web portal is exposed through NodePort by default, and its default port number is 30003 with TLS enabled and 30002 with TLS disabled.
   • TLS is enabled by default for connections to Harbor web portal, and a secret resource named harbor-tls-secret is required for that purpose. It can be provisioned through cert-manager or manually with the following command using self-signed certificate:

     kubectl create secret tls harbor-tls-secret --cert=[path to certificate file] --key=[path to key file] -n eksa-packages
     

   • secretKey has to be set as a string of 16 characters for encryption.

   TLS example with auto certificate generation

   apiVersion: packages.eks.amazonaws.com/v1alpha1
   kind: Package
   metadata:
      name: my-harbor
      namespace: eksa-packages-<cluster-name>
   spec:
      packageName: harbor
      config: |-
         secretKey: "use-a-secret-key"
         externalURL: https://harbor.eksa.demo:30003
         expose:
            tls:
               certSource: auto
               auto:
                  commonName: "harbor.eksa.demo"      
   

   Non-TLS example

   apiVersion: packages.eks.amazonaws.com/v1alpha1
   kind: Package
   metadata:
      name: my-harbor
      namespace: eksa-packages-<cluster-name>
   spec:
      packageName: harbor
      config: |-
         secretKey: "use-a-secret-key"
         externalURL: http://harbor.eksa.demo:30002
         expose:
            tls:
               enabled: false      
   

4. Install Harbor

   eksctl anywhere create packages -f harbor.yaml
   

5. Check Harbor

   eksctl anywhere get packages --cluster <cluster-name>
   

   Example command output

   NAME        PACKAGE   AGE     STATE       CURRENTVERSION             TARGETVERSION        DETAIL
   my-harbor   harbor    5m34s   installed   v2.5.1                     v2.5.1 (latest)
   

   Harbor web portal is accessible at whatever externalURL is set to. See complete configuration options for all default values.

   

Update

To update package configuration, update harbor.yaml file, and run the following command:

eksctl anywhere apply package -f harbor.yaml

Upgrade

1. Verify a new bundle is available

   eksctl anywhere get packagebundle
   

   Example command output

   NAME         VERSION   STATE
   v1.25-120    1.25      active (upgrade available)
   v1.26-120    1.26      inactive
   

2. Upgrade Harbor

   eksctl anywhere upgrade packages --bundle-version v1.26-120
   

3. Check Harbor

   eksctl anywhere get packages --cluster <cluster-name>
   

   Example command output

   NAME        PACKAGE   AGE     STATE       CURRENTVERSION             TARGETVERSION        DETAIL
   my-harbor   Harbor    14m     installed   v2.7.1                     v2.7.1 (latest)
   

Uninstall

1. Uninstall Harbor

   Important

   • By default, PVCs created for jobservice and registry are not removed during a package delete operation, which can be changed by leaving persistence.resourcePolicy empty.

   eksctl anywhere delete package --cluster <cluster-name> my-harbor
   

16.2 - Harbor use cases

Proxy a public Amazon Elastic Container Registry (ECR) repository

This use case is to use Harbor to proxy and cache images from a public ECR repository, which helps limit the amount of requests made to a public ECR repository, avoiding consuming too much bandwidth or being throttled by the registry server.

1. Login

   Log in to the Harbor web portal with the default credential as shown below

   admin
   Harbor12345
   

   

2. Create a registry proxy

   Navigate to Registries on the left panel, and then click on NEW ENDPOINT button. Choose Docker Registry as the Provider, and enter public-ecr as the Name, and enter https://public.ecr.aws/ as the Endpoint URL. Save it by clicking on OK.

   

3. Create a proxy project

   Navigate to Projects on the left panel and click on the NEW PROJECT button. Enter proxy-project as the Project Name, check Public access level, and turn on Proxy Cache and choose public-ecr from the pull-down list. Save the configuration by clicking on OK.

   

4. Pull images

   Note

   • harbor.eksa.demo:30003 should be replaced with whatever externalURL is set to in the Harbor package YAML file.

   docker pull harbor.eksa.demo:30003/proxy-project/cloudwatch-agent/cloudwatch-agent:latest
   

Proxy a private Amazon Elastic Container Registry (ECR) repository

This use case is to use Harbor to proxy and cache images from a private ECR repository, which helps limit the amount of requests made to a private ECR repository, avoiding consuming too much bandwidth or being throttled by the registry server.

1. Login

   Log in to the Harbor web portal with the default credential as shown below

   admin
   Harbor12345
   

   

2. Create a registry proxy

   In order for Harbor to proxy a remote private ECR registry, an IAM credential with necessary permissions need to be created. Usually, it follows three steps:

   1. Policy

      This is where you specify all necessary permissions. Please refer to private repository policies , IAM permissions for pushing an image and ECR policy examples to figure out the minimal set of required permissions.

      For simplicity, the build-in policy AdministratorAccess is used here.

      

   2. User group

      This is an easy way to manage a pool of users who share the same set of permissions by attaching the policy to the group.

      

   3. User

      Create a user and add it to the user group. In addition, please navigate to Security credentials to generate an access key. Access keys consists of two parts: an access key ID and a secret access key. Please save both as they are used in the next step.

      

   Navigate to Registries on the left panel, and then click on NEW ENDPOINT button. Choose Aws ECR as Provider, and enter private-ecr as Name, https://[ACCOUNT NUMBER].dkr.ecr.us-west-2.amazonaws.com/ as Endpoint URL, use the access key ID part of the generated access key as Access ID, and use the secret access key part of the generated access key as Access Secret. Save it by click on OK.

   

3. Create a proxy project

   Navigate to Projects on the left panel and click on NEW PROJECT button. Enter proxy-private-project as Project Name, check Public access level, and turn on Proxy Cache and choose private-ecr from the pull-down list. Save the configuration by clicking on OK.

   

4. Pull images

   Create a repository in the target private ECR registry

   

   Push an image to the created repository

   docker pull alpine
   docker tag alpine [ACCOUNT NUMBER].dkr.ecr.us-west-2.amazonaws.com/alpine:latest
   docker push [ACCOUNT NUMBER].dkr.ecr.us-west-2.amazonaws.com/alpine:latest
   

   Note

   • harbor.eksa.demo:30003 should be replaced with whatever externalURL is set to in the Harbor package YAML file.

   docker pull harbor.eksa.demo:30003/proxy-private-project/alpine:latest
   

Repository replication from Harbor to a private Amazon Elastic Container Registry (ECR) repository

This use case is to use Harbor to replicate local images and charts to a private ECR repository in push mode. When a replication rule is set, all resources that match the defined filter patterns are replicated to the destination registry when the triggering condition is met.

1. Login

   Log in to the Harbor web portal with the default credential as shown below

   admin
   Harbor12345
   

   

2. Create a nonproxy project

   

3. Create a registry proxy

   In order for Harbor to proxy a remote private ECR registry, an IAM credential with necessary permissions need to be created. Usually, it follows three steps:

   1. Policy

      This is where you specify all necessary permissions. Please refer to private repository policies , IAM permissions for pushing an image and ECR policy examples to figure out the minimal set of required permissions.

      For simplicity, the build-in policy AdministratorAccess is used here.

      

   2. User group

      This is an easy way to manage a pool of users who share the same set of permissions by attaching the policy to the group.

      

   3. User

      Create a user and add it to the user group. In addition, please navigate to Security credentials to generate an access key. Access keys consists of two parts: an access key ID and a secret access key. Please save both as they are used in the next step.

      

   Navigate to Registries on the left panel, and then click on the NEW ENDPOINT button. Choose Aws ECR as the Provider, and enter private-ecr as the Name, https://[ACCOUNT NUMBER].dkr.ecr.us-west-2.amazonaws.com/ as the Endpoint URL, use the access key ID part of the generated access key as Access ID, and use the secret access key part of the generated access key as Access Secret. Save it by clicking on OK.

   

4. Create a replication rule

   

5. Prepare an image

   Note

   • harbor.eksa.demo:30003 should be replaced with whatever externalURL is set to in the Harbor package YAML file.

   docker pull alpine
   docker tag alpine:latest harbor.eksa.demo:30003/nonproxy-project/alpine:latest
   

6. Authenticate with Harbor with the default credential as shown below

   admin
   Harbor12345
   

   Note

   • harbor.eksa.demo:30003 should be replaced with whatever externalURL is set to in the Harbor package YAML file.

   docker logout
   docker login harbor.eksa.demo:30003
   

7. Push images

   Create a repository in the target private ECR registry

   

   Note

   • harbor.eksa.demo:30003 should be replaced with whatever externalURL is set to in the Harbor package YAML file.

   docker push harbor.eksa.demo:30003/nonproxy-project/alpine:latest
   

   The image should appear in the target ECR repository shortly.

   

Set up trivy image scanner in an air-gapped environment

This use case is to manually import vulnerability database to Harbor trivy when Harbor is running in an air-gapped environment. All the following commands are assuming Harbor is running in the default namespace.

1. Configure trivy

   TLS example with auto certificate generation

   apiVersion: packages.eks.amazonaws.com/v1alpha1
   kind: Package
   metadata:
      name: my-harbor
      namespace: eksa-packages
   spec:
      packageName: harbor
      config: |-
        secretKey: "use-a-secret-key"
        externalURL: https://harbor.eksa.demo:30003
        expose:
          tls:
            certSource: auto
            auto:
              commonName: "harbor.eksa.demo"
          trivy:
            skipUpdate: true
            offlineScan: true     
   

   Non-TLS example

   apiVersion: packages.eks.amazonaws.com/v1alpha1
   kind: Package
   metadata:
      name: my-harbor
      namespace: eksa-packages
   spec:
      packageName: harbor
      config: |-
        secretKey: "use-a-secret-key"
        externalURL: http://harbor.eksa.demo:30002
        expose:
          tls:
            enabled: false
        trivy:
          skipUpdate: true
          offlineScan: true     
   

   If Harbor is already running without the above trivy configurations, run the following command to update both skipUpdate and offlineScan

   kubectl edit statefulsets/harbor-helm-trivy
   

2. Download the vulnerability database to your local host

   Please follow oras installation instruction .

   oras pull ghcr.io/aquasecurity/trivy-db:2 -a
   

3. Upload database to trivy pod from your local host

   kubectl cp db.tar.gz harbor-helm-trivy-0:/home/scanner/.cache/trivy -c trivy
   

4. Set up database on Harbor trivy pod

   kubectl exec -it harbor-helm-trivy-0 -c trivy bash
   cd /home/scanner/.cache/trivy
   mkdir db
   mv db.tar.gz db
   cd db
   tar zxvf db.tar.gz
   

16.3 - v2.5.0

Configuring Harbor in EKS Anywhere package spec

The following table lists the configurable parameters of the Harbor package spec and the default values.

16.4 - v2.5.1

Configuring Harbor in EKS Anywhere package spec

The following table lists the configurable parameters of the Harbor package spec and the default values.

16.5 - v2.7.1

Configuring Harbor in EKS Anywhere package spec

The following table lists the configurable parameters of the Harbor package spec and the default values.

16.6 - v2.10.2

Configuring Harbor in EKS Anywhere package spec

The following table lists the configurable parameters of the Harbor package spec and the default values.

16.7 - v2.11.1

Configuring Harbor in EKS Anywhere package spec

The following table lists the configurable parameters of the Harbor package spec and the default values.